No Parts Required - Toro Z Master Professional 5000 Series Setup Instructions

19
Checking the Machine Before Delivery to the Customer
For All Machines

No Parts Required

Procedure
Before delivering the machine to the customer, ensure that you perform or have performed the procedures
listed in the following table and initial each when finished. Refer to the Operator's Manual for instructions on
performing these procedures.
Initial
When you finish setting up the machine, sign and date in the space provided below:
Signature:
Check the tire pressure.
Check the level of the machine.
Check that all spindles are greased.
Check the engine-oil level.
Check the hydraulic-fluid level.
Check that the ROPS is secure.
On liquid-cooled machines, check the level of the coolant in the radiator and overflow bottle.
Check the adjustment of the parking brake.
Ensure that the machine tracks correctly; refer to the Operator's Manual for the adjustment procedure.
Check the safety-interlock system; refer to the Operator's Manual.
Ensure that the PTO works properly.
Check all the fasteners that you installed and ensure that they are tight.
Check Procedure
Date:
14