Toro Z Master Professional 5000 Series Setup Instructions page 3

Figure 2
Diesel Machine Shown
2. Raise the rear of the machine and support it
with jack stands.
Figure 3
Gasoline Machine Shown
Figure 4
Diesel Machine Shown
3. Remove the wheel nuts from both sides of the
machine and remove the right angle retaining
plate. Discard the screws and retaining plate.
g001059
4. Mount the wheels with the valve stem to the
outside and secure them with the wheel nuts
previously removed.
5. Torque the wheel nuts to 128 N∙m (95 ft-lb).
6. Remove the jack stands.
g010180
g001089
3
Figure 5
Diesel Machine Shown
Figure 6
Gasoline Machine Shown
Figure 7
Diesel Machine Shown
g001088
g010181
g001071