Table of Contents
Advertisement
3.1.2
Installation location requirements
Strong vibrations
Damage to device
● In plants with strong vibrations, mount the transmitter in a low vibration environment away
NOTICE
Aggressive atmospheres
Damage to device through penetration of aggressive vapors.
● Ensure that the device is suitable for the application.
NOTICE
Direct sunlight
Damage to device.
The device can overheat or materials become brittle due to UV exposure.
● Protect the device from direct sunlight.
● Make sure that the maximum permissible ambient temperature is not exceeded. Refer to
Insufficient air circulation
Risk of fire.
The device may overheat or start burning in case of insufficient air circulation.
● Ensure sufficient air circulation in the room. Refer to the information in Technical data
SITRANS FC410
Compact Operating Instructions, 05/2020, A5E39942309-AB
CAUTION
from the sensor.
the information in Installing/mounting (Page 17).
WARNING
(Page 41).
Installing/mounting
3.1 Basic safety notes
19
Advertisement
Table of Contents
