Installation Location Requirements - Siemens SITRANS MASS 2100 Compact Operating Instructions

3.1.2

Installation location requirements

NOTICE
Strong vibrations
Damage to device.
● In installations with strong vibrations, mount the transmitter in a low vibration environment.
NOTICE
Aggressive atmospheres
Damage to device through penetration of aggressive vapors.
● Ensure that the device is suitable for the application.
NOTICE
Direct sunlight
Damage to device.
The device can overheat or materials become brittle due to UV exposure.
● Protect the device from direct sunlight.
● Make sure that the maximum permissible ambient temperature is not exceeded. Refer to
Insufficient air supply
The device may overheat if there is an insufficient supply of air.
● Install the device so that there is sufficient air supply in the room.
● Observe the maximum permissible ambient temperature. Refer to the information in the
SITRANS MASS 2100 & FC300 (FCT010)
Compact Operating Instructions, 05/2020, A5E40504094-AB
the information in Technical data (Page 47).
WARNING
section Technical data (Page 47).
Installing/mounting
3.1 Basic safety notes
19