Installation Location Requirements - Siemens SITRANS F Series Operating Instructions Manual

4.1.1

Installation location requirements

Insufficient air supply
The device may overheat if there is an insufficient supply of air.
● Install the device so that there is sufficient air supply in the room.
● Observe the maximum permissible ambient temperature. Refer to the information in the
NOTICE
Aggressive atmospheres
Damage to device through penetration of aggressive vapors.
● Ensure that the device is suitable for the application.
NOTICE
Direct sunlight
Device damage.
The device can overheat or materials become brittle due to UV exposure.
● Protect the device from direct sunlight.
● Make sure that the maximum permissible ambient temperature is not exceeded. Refer to
NOTICE
Strong vibrations
Damage to device.
● In installations with strong vibrations, mount the transmitter in a low vibration environment.
SITRANS FC310
Operating Instructions, 01/2019, A5E44036384-AB
WARNING
section Technical data (Page 105).
the information in Technical data (Page 105).
Installing/mounting
4.1 Basic safety notes
29