Service and maintenance
6.1
Basic safety notes
Note
The device is maintenance-free.
The device is maintenance-free. However, a periodic inspection according to pertinent
directives and regulations must be carried out.
An inspection can include, for example, check of:
● Ambient conditions
● Seal integrity of the process connections, cable entries, and cover
● Reliability of power supply, lightning protection, and grounds
Impermissible repair of explosion protected devices
Risk of explosion in hazardous areas
● Repair must be carried out by Siemens authorized personnel only.
Dust layers above 5 mm
Risk of explosion in hazardous areas.
Device may overheat due to dust build up.
● Remove dust layers in excess of 5 mm.
NOTICE
Penetration of moisture into the device
Damage to device.
● Make sure when carrying out cleaning and maintenance work that no moisture penetrates
SITRANS FC410
Compact Operating Instructions, 05/2020, A5E39942309-AB
WARNING
WARNING
the inside of the device.
6
35