5.3.2
Decouple
The Decouple function can be used in the detailed view of the individual devices. In doing so,
the terminal devices are decoupled from 7KN Powercenter 1000, similar to a long button
press on the devices, except that the software function does not reset the communication
information. A long button press is still necessary in order to ensure that the standard PIN can
be paired again.
If a terminal device was decoupled, it is no longer displayed in the list of connected devices of
the 7KN Powercenter 1000. In the app's project list, which can be accessed via the gear icon,
the device is still displayed and can either be re-paired or simply deleted.
If decoupling is not possible because the terminal device cannot communicate with
7KN Powercenter 1000 at the moment, a message is displayed with an option of deleting the
terminal, which removes the terminal in 7KN Powercenter 1000 and in the SENTRON
powerconfig app.
Android
Circuit protection devices with communication and metering function
System Manual, 06/2021, L1V30827018B-01
iOS
Commissioning
5.3 Removing devices
45