Installation and connection
4.2 Device installation
4.2.3
The 5SL6 COM miniature circuit breaker and 5SV6 COM arc fault detection
device
Both devices are simply snapped on to the DIN rail.
Example 5SV6 COM arc fault detection device:
4.2.4
Install 3NA COM fuse
The 3NA fuse link can only be installed in an LV HRC fuse link holder together with the 3NX
electronic module pushed on.
The LV HRC 3NA COM fuse link and the appropriate electronic module can be ordered as a
unit, however they are delivered in separate packages and still have to be mounted together.
Installation takes place in all common LV HRC fuse bases or fuse switchgears of the
appropriate size similar to the installation of a normal LV HRC fuse link according to
IEC 60269-2 without the electronic module.
28
Circuit protection devices with communication and metering function
System Manual, 06/2021, L1V30827018B-01