Removing The Back, Control Cover And Glass Touch Assembly - LG LDG4313BD Service Manual

REMOVING THE BACK, CONTROL COVER
WARNING
• DISCONNECT power supply cord
from the outlet before servicing.
• Replace all panels and parts before
operating.
• RECONNECT all grounding devices
- Failure to do so can result in severe personal
injury, death or electric shock.
CAUTION
• Use caution when handling sheet
metal parts while servicing the range.
- Some parts may have sharp edges, which
could result in injury..
1. Turn off the electrical supply and gas supply going
to the range.
2. Pull the range away from the wall so that you can
access the rear panel.
3. Remove the 8 screws from the rear control cover
and remove the cover.
4. Remove the 1 screw from the motor cover and
remove motor cover.
5. Remove the 11 screws from the rear back cover
and remove rear back cover.
COMPONENT ACCESS
AND GLASS TOUCH ASSEMBLY
Control Cover
Back Cover
Motor Cover
7. Separate PCB assembly after unpluging the
connectors.
8. Remove the 2 screws of the eyebrow from the
controller sub assembly and remove the eyebrow.
Eyebrow
9. Remove 6 Screws of controller sub assembly.
10. Pull the controller sub assembly out.
11. Replace the Glass touch assembly.
3-2
8 Connectors of PCB