LG LDG4313BD Service Manual page 21

REMOVING THE DOOR LATCH & UPPER DOOR SwITCH
WARNING
• DISCONNECT power supply cord
from the outlet before servicing.
• Replace all panels and parts before
operating.
• RECONNECT all grounding devices.
- Failure to do so can result in severe personal
injury, death or electric shock.
CAUTION
• Use caution when handling sheet
metal parts while servicing the
range.
- Some parts may have sharp edges, which
could result in injury.
1. Turn off the electrical supply and gas supply
going to the range.
2. Remove the Upper door.
(See page 3-19 for the procedure)
3. Remove the manifold, cooktop plate(see page
3-5 for the procedure).
4. Remove 2 screws from the duct upper and then
remove the duct upper.
5. To remove the door latch:
a) Remove the two screws form the front plate
and remove the latch.
COMPONENT ACCESS
(For the Upper oven only)
2 Screws Front plate
b) Remove the door latch from the Upper cavity
and unhook the actuating rod.
6. To remove the door switch:
a) Remove the door switch from the range.
To do this, squeeze tabs and use a long nose
plier or a snapring plier, and tap it out of the
hole with a hammer.
b) Disconnect the wires from the terminals.
3-8
Unhook
Actuating
Rod
1
2
Wires
Door
Switch