How To Display Ais Target Details; How To Change Ais Orientation - Furuno FI70DSW Operator's Manual

2. DISPLAY CATEGORIES AND CATEGORY SPECIFIC MENUS
2.9.1

How to display AIS target details

1. Press the function key to show the AIS key indications, as shown in the figure
below.
2. Press the left software key to cycle through the targets, in order, from closest to
farthest. Press the right software key to cycle through the targets, in order, from
farthest to closest.
3. Press the function key to select a target and display its details.
Target's MMSI ID MMSI:
Target's Call Sign Call Sign:
Target's Speed SOG:
Over Ground
Press the right software key to show the hidden items RNG, CPA and TCPA.
2.9.2

How to change AIS orientation

With the AIS screen displayed, press the Menu key to display the [AIS] menu.
[Orientation] may be set to [Heading Up] or [North Up].
1. Select [Orientation], then press the function key.
2. Press the software keys to select the appropriate orientation, then press the
function key.
3. Press the Menu/Back key to close the menu.
2-10
AIS
Detail
AIS details (Page 1)
Furuno
0123456789
ABCDEFG
10.5kn
North Up
Heading Up
N
Target
vessel's
name
Range to
RNG:
target
Target's CPA CPA:
Target's TCPA
TCPA:
AIS details (Page 2)
Furuno
5NM
10NM
65min