Mincing Meat - Saturn ST-FP7093К Manual

Press the lock button and insert
♦
the grinder head into the opening of the
motor housing. Push in and turn counter
clockwise until the safety lock clicks into
place (fig. 5, 6, 7).
Place the hopper tray on the feed
♦
tube (fig. 8).
Use the food pusher to push food
♦
gently, one piece at a time into the
feeding tube. Do not force the food into
the tube.

MINCING MEAT

Make sure the unit is unplugged
♦
while assembling.
Before operating please assemble
♦
the unit (fig. 1 to 8).
Cut foods into pieces (sinewless,
♦
boneless and fatless meat is recom-
mended, approximate size: 20 mm x 20
mm x 60 mm), so that they fit easily
into the hopper.
Plug in and turn the "R / ON"
♦
switch to "ON"
"ON/OFF/ Reverse"
Place food in the hopper tray and use
the food pusher to feed food into the
hopper opening.
CAUTION: DO NOT USE YOUR FIN-
GERS TO FEED FOOD THROUGH THE
HOPPER (fig. 8).
Turn the unit OFF when complete.
♦
MAKING KЕBBE
Make sure the unit is unplugged
♦
while assembling.
Position the kеbbe attachments A
♦
and B onto the feed screw. Be sure the
kеbbe attachments A and B fit into the
slots in the grinder tube (fig. 9).
Securely attach the cap to the end
♦
of the grinder tube (fig. 10). Do not
over tighten.
Place the hopper tray on the feed
♦
tube (fig. 11).
When you are ready to operating, use
the food pusher to push food gently one
piece at a time into the feeding tube. Do
not force the food into the tube (fig. 11,
12).
position. Turn the
switch to "ON".
MAKING SAUSAGE
Make sure the unit is unplugged while
assembling.
♦ Insert the feed screw into the grinder
tube, long end first (fig. 13).
♦ Position the cutting blade onto the
feed screw with the flat surface of the
blade facing you.
NOTE: If it is not fitted properly, meat
will not be ground the cutting plate may
be damaged (fig. 13).
♦ Position the desired cutting plate onto
the feed screw, against the flat sides of
the cutting blade. Be sure the notched
on the cutting plate fit into the slots in
the grinder tube (fig. 13).
♦ Position the sausage stuffer onto the
feed screw. Be sure the sausage stuffer
fit into the slots in the grinder tube (fig.
13).
♦ Securely attach the cap to the end of
the grinder tube (fig. l4). Do not over
tighten.
♦ Place the hopper tray on the feed tube
(fig. 15).
♦ When you are ready to operating, use
the food pusher to push food gently,
one piece at a time into the feeding
tube. Do not force the food into the tube
(fig. 15).
CLEANING
♦ Make sure the unit is OFF and the mo-
tor has stopped complete before disas-
sembling the unit.
♦ Unplug from the power outlet. Press
the lock button. Turn the grinder head
until you can remove the cap (fig. 6). If
necessary, use a screwdriver for remov-
ing the cap (fig. 16- 17).
5