Table of Contents
Advertisement
If it is On, rewind the media 690 mm (27.2 inches) automatically after drying.
2.Prevent Drying After Printing
When this function is turned on, the media feeding will be stopped immediately after the
printing is completed. As the result, it can save 545mm (21.4 inches) of media consumption
between jobs which is generated for drying. The undried part of printed image will be dried
while printing next job.
▪
The print quality may deteriorate because the drying of printed image is stopped
before the drying is completed. In order to dry the media and reduce the
deterioration of print quality, it is recommended to print the next print in the same
print mode or the print mode with a higher number of passes.
▪
If you want to dry the printed image of the undried area without printing next job,
execute "Execute Drying After Printing" to dry it. In this case, the waste media
cannot be reduced.
▪
If the sleep mode transition time is set to short time, the device transits into to sleep
mode and drying after printing is not performed. Change the setting of Sleep Mode
Transition Time according to the usage situation.
(Setting range: 5 to 60 minutes / Default: 5 minutes)
47
Advertisement
Table of Contents
