* The above dimensions are approximate and cannot be guaranteed.
▪
If the printed part is contacting the floor, cutting may not work because cutter and
cutter arm cannot catch the media. In addition, media may be skewed, and image
quality may be degraded.
How to set auto cut function
▪
To set auto cut function on the ColorGATE RIP:
Right click the job
"Cutter" check box.
▪
To Set the auto cut function on the ONYX RIP:
Right click on the job
click the "Auto Paper Cut" check box.
select "Settings"
select the "Printer" tab
Open the "Edit"
43
select the "Printer Settings" tab
click the