Ricoh Pro L5130e Solutions Manual page 13

If this does not solve the problem, change the setting to a higher level.
If media feed correction is too strong, white bands may occur.
If the ink set is 4C or 6C, it is recommended to set Level 2 in 12pass mode (600 x 900dpi).
Recommended level for each ink set
12pass
Other than 12 passes
Setting
Level 0 Media Feed Correction is turned off in the corresponding print mode.
Level 1 Media Feed Correction is on.
Level 2 Stronger than level 1
Level 3 Stronger than level 1 and level 2
For ink sets 4C and 6C, increasing the media feed correction level will slow down the print
speed. When the ink set is 4CW, increasing the media feed correction level does not change
the print speed.
The table below shows the print speed in 12-pass mode (600 x 900dpi) and color printing.
Model name
Pro L5160e
Pro L5130e
Refer to "Convenient Usage" in the manual "Operating Instructions" for instructions on how
to adjust the media feed correction.
4C 4CW
1st: Level 0 1st: Level 0
2nd: Level 2 2nd: Level 1
3rd: Level 3 3rd: Level 2
4th: Level 3
1st: Level 0 1st: Level 0
2nd: Level 1 2nd: Level 1
3rd: Level 2 3rd: Level 2
4th: Level 3 4th: Level 3
Meaning
Ink set Print speed at each level of Media
Feed Correction [m
Level0
4C 25.0
6C 17.0
4C 22.3
6C 15.2
13
6C
1st: Level 0
2nd: Level 2
3rd: Level 3
1st: Level 0
2nd: Level 1
3rd: Level 2
4th: Level 3
2
/h]
Level2
20.1
12.9
18.0
11.6