Table of Contents
Advertisement
[Adding registration marks]
Using the ColorGATE RIP, you can add registration marks to the job.
The way to add registration marks may vary depending on the version.
Right click on the job
on the cut marks icon
Using ONYX RIP, you can add registration marks to the job.
The way to add registration marks may vary depending on the version.
Right click on the job
the "Edge Marks"
[Details / Solution]
The solution varies depending on the problem. See the corresponding item.
▪
a≠b
If the registration marks are not on the same level on the right and left positions, the
media is skewed.
page 11 "STEP1-1 If there is skewing"
Open the "Settings" window
Select "Cut Marks".
Open the "Job Properties"
10
Open the "Job" tab
Open the "Marks" tab
Click
Check
Advertisement
Table of Contents
