Adjusting The Rx Report Setting - Canon LASER CLASS 730i User Manual

Adjusting the RX REPORT setting

Your machine can print an RX (reception) report after receiving a document. You can set it to
print every time it receives a document, or only when an error occurs. Alternatively, you can
disable printing of a report.
Follow this procedure to adjust this setting:
1
Press [Menu].
2
Use [2 2 2 ] or [3 3 3 2
3
Press [Set].
U S E R D A T A
1 . T E L R E G I S T R A T I O N
4
2 ] or [3 3 3 2
Use [2 2
5
Press [Set].
F A X S E T T I N G S
1 . U S E R S E T T I N G S
6
2 2 ] or [3 3 3
Use [2 2
7
Press [Set].
R E P O R T S E T T I N G S
1 . T X R E P O R T
8 2 ] or [3 3 3 2
Use [2 2
9
Press [Set].
R X R E P O R T
10
Use [2 2 2 ] or [3 3 3 2
• Select:
– <OUTPUT NO> to disable printing of a report.
– <PRINT ERROR ONLY> to print a report only when a reception error occurs.
– <OUTPUT YES> to print a report every time you receive a document.
11
Press [Set].
12
Press [Stop/Reset].
10-4
Reports and lists
3 ] to select <USER DATA>.
3 ] to select <FAX SETTINGS>.
3 ] to select <REPORT SETTINGS>.
3 ] to select <RX REPORT>.
O U T P U T N O
3 ] to select the setting you want.
Chapter 10