8
Press [Set].
C A R D P R O T E C T
9
2
2 ] or [3 3 3
Use [2 2
10
Press [Set].
11
Press [Stop/Reset] to return to standby mode.
12
Press [Copy], [Fax], or [Scan] to select a mode other than photo print mode.
• To avoid damage to data being accessed on a memory card, you cannot overwrite data in photo
print mode.
13
Insert a memory card into the appropriate slot.
IMPORTANT
• If you change the above setting while a memory card is inserted in a card slot, turn the machine off
then on again. The new setting will not be activated until you do so.
4-16
Photo printing from a memory card
O N
3 ] to select <ON> to disable overwriting or <OFF> to enable overwriting.
Chapter 4