Adjusting The Image Quality (Resolution); Adjusting The Exposure (Density) - Canon LASER CLASS 730i User Manual

Adjusting the image quality (resolution)

Refer to Making copies on p. 5-1 and in step 4, adjust the image quality as follows:
1
Press [Image Quality].
2 2 ] or [3 3 3 2
Use [2 2
• In black & white mode, select:
– <B&W TEXT> for text-only documents.
– <B&W PHOTO> for photographs.
– <B&W DRAFT> for high-speed copying at a lower resolution.*
• In color mode, select:
– <COLOR NORMAL> for color text-only documents.**
– <COLOR FINE> for color photographs.
– <COLOR FAST> for high-speed color copying at a lower resolution.*
3
Press [Set].
NOTE
• When using <COLOR FAST>, if the color output is different from that expected, select <COLOR NORMAL>
or <COLOR FINE> and try copying again.

Adjusting the exposure (density)

Exposure (density) is the degree of difference between light and dark. A high exposure setting
will make blacks darker and whites brighter, whereas a low exposure setting will make the
differences between black and white less marked.
Refer to Making copies on p. 5-1 and in step 4, adjust the exposure as follows:
1
Press [Exposure].
2
2 ] or [3 3 3 2
Use [2 2
3
Press [Set].
* This setting is only available when <PLAIN> is selected as the print media type (
** This setting is not available when <GLOSSY> or <PHOTO> is selected as the print media type (
5-2
Copying
3 ] to select the image quality.
3 ] to select the exposure.
p. 3-6).
p. 3-6).
Chapter 5