Adjusting The Tx Report Setting - Canon LASER CLASS 730i User Manual

Adjusting the TX REPORT setting

Your machine can print a TX (transmission) report after sending a document. You can set it to
print every time it sends a document, or only when an error occurs. Alternatively, you can
disable printing of a report.
Follow this procedure to adjust this setting:
1
Press [Menu].
2
2 ] or [3 3 3 2
Use [2 2
3
Press [Set].
U S E R D A T A
1 . T E L R E G I S T R A T I O N
4 2 ] or [3 3 3 2
Use [2 2
5
Press [Set].
F A X S E T T I N G S
1 . U S E R S E T T I N G S
6
Use [2 2 2 ] or [3 3 3 2
7
Press [Set] twice.
T X R E P O R T
P R I N T E R R O R O N L Y
8
2 ] or [3 3 3 2
Use [2 2
• Select:
– <PRINT ERROR ONLY> to print a report only when a transmission error occurs.
– <OUTPUT YES> to print a report every time you send a document.
– <OUTPUT NO> to disable printing of a report.
If you selected <OUTPUT NO> in step 8:
9
Press [Set].
10
Press [Stop/Reset].
If you selected <PRINT ERROR ONLY> or <OUTPUT YES> in step 8:
9
Press [Set].
P R I N T W I T H I M A G E
10
Use [2 2 2 ] or [3 3 3 2
report (valid for black & white faxes only).
• Select:
– <ON> to print the first page of the fax under the report.
– <OFF> not to print the first page of the fax under the report.
11
Press [Set].
12
Press [Stop/Reset].
Chapter 10
3 ] to select <USER DATA>.
3 ] to select <FAX SETTINGS>.
3 ] to select <REPORT SETTINGS>.
3 ] to select the setting you want.
O N
3 ] to select if you want the first page of your fax to be printed under the
10-3
Reports and lists
10