13: Machine Settings; Fax Model; Printing A List To Check The Current Settings; Accessing The Machine Settings - Canon LASER CLASS 730i User Manual

Chapter
13

Printing a list to check the current settings

Before changing any settings, you can print the USER'S DATA LIST to check the current settings
of your machine. For details, see p. 10-5.

Accessing the machine settings

Follow this procedure to change a setting:
1
Refer to the lists on the following pages to find the setting you want to change.
2
If there is a reference for the
setting q, refer to that page for
details. If not, at the top of the
list, note under which function
key w and menu e the setting is
located.
3
Press [Copy], [Scan], [Photo
Print], or

Fax Model

depending under which
function key w the setting is
located.
4
Press [Menu].
5
2 ] or [3 3 3 2
Use [2 2
6
Press [Set].
• You have now accessed the settings in the list.
7
Use [2 2 2 ] or [3 3 3 2
8
Press [Set].
9
Follow these guidelines to scroll through and register settings:
• Use [2 2 2 ] or [3 3 3 2
• To register a setting or access sub-settings, press [Set].
• To return to a previous level, press [Menu].
10
When you have finished, press [Stop/Reset].
Chapter 13
Machine settings
[Fax]
3 ] to select the menu e under which the setting is located.
3 ] to select the setting you want.
3 ] to scroll through settings.
Example:
e w
Menu: SPECIAL COPY
Function key: [Copy]
Name Description
1. 2 on 1 Copies two pages on one page (letter- or A4-size only). —
Copies without any borders (letter, 4" × 6", 5" × 7", or
2. BORDERLESS COPY
A4-size only).
3. IMAGE REPEAT Prints multiple copies of an image on a single sheet.
AUTO Automatically selects the number of repetitions.
MANUAL Manually selects the number of repetitions.
VERTICAL Selects the number of vertical repetitions.
HORIZONTAL Selects the number of horizontal repetitions.
4. MIRROR IMAGE Prints a mirror image of the original.
5. ENTIRE IMAGE Prints the original image to fit the selected print media
size.
q
Setting Details
p. 5-4
— p. 5-5
— p. 5-6
—
1/2/3/4
1/2/3/4
— p. 5-8
— p. 5-9
Machine settings
13
13-1