Mitsubishi Electric FR-F 700 EC Instruction Manual page 109

Heatsink protrusion attachment procedure
(2) Shift and removal of a rear side installation frame
• FR-F740-05470 to 06830
One installation frame is attached to each of the upper and lower
part of the inverter. Change the position of the rear side installa-
tion frame on the upper and lower side of the inverter to the front
side as shown on the right. When changing the installation
frames, make sure that the installation orientation is correct.
• FR-F740-04320/04810, 07700 or more
Two installation frames each are attached to the upper and lower
part of the inverter. Remove the rear side installation frame on the
upper and lower side of the inverter as shown on the right.
102
Shift
Upper
installation
frame
Lower
installation
Shift
frame
Removal
Upper installation
frame (rear side)
Lower installation
frame (rear side)
Removal