Canon FAX L1000 Service Manual page 446

FAX-L1000 Chapter 5: Appendix
3.4.5 Installation Position Adjustment of Separation Guide of
Envelope Feeder (adjustment of gap between separation guide
and lower separation roller)
a) When
Normally, the separation guide and the top cover of the envelope feeder must be removed
as one. However, if only the separation guide has been removed for unavoidable reason, or
it needs to be replaced due to deformation, make the adjustment as shown below.
b) Tools
Tool
1.6mm thickness gauge (RY9-0123)
c) Adjustment
(1) Install the separation guide.
(2) Insert the 1.6mm thickness gauge (RY9-0123) between the separation guide and the
lower separation roller.
(3) Fix the separation guide with 1.6mm gap between the separation guide and the lower
separation roller.
Thickness gauge
1.6mm
Lower separation roller
Separation guide
Separation guide
Thickness gauge
(1.6mm, RY9-0123)
Figure 5-35 Adjustment of Separation Guide
Use
Measuring gap between the separation guide
and the lower separation roller
5-88