Special Tools - Canon FAX L1000 Service Manual

FAX-L1000 Chapter 4: Maintenance and Service
1.2 Tools
1.2.1 General tools
Tool
Phillips screwdriver
Slot head screwdriver
Precision phillips screwdriver
Precision slot head screwdriver
Tweezers
Pliers, needle nose
Digital volt meter
Lint-free paper
Isopropyl alcohol
Ruler

1.2.2 Special tools

Tool
Grease (TELLUS OIL 68)
Grease (MOLYKOTE EM-50L)
Grease (FLOIL GE676)
Printer driver tester
Thickness gauge (1.6mm)
Thickness gauge (0.7mm)
IC-Removing Tool (24~64pin)
Use
Removing/inserting screws
Removing/inserting screws
Adjust volume
Removing plastic tabs
Removing/inserting coil springs
Attaching retaining ring
Check voltage
Clean transfer charging roller, fixing film
Clean fixing film, fixing entrance guide, fixing
pressure roller, fixing eject roller, face-up deflector,
static charge eliminator, etc.
Measure leading edge margin of print image
Use
Apply to specified parts
Apply to specified parts
Apply to specified parts
Check operation of the
printer and options.
Used for installing the
separation guide of the
optional envelope feeder.
Used with the printer driver
tester to adjust installation
position of the envelope
multiple feed sensor of the
envelope feeder.
Remove the main ROM
on the SCNT board
4-6
Part No.
CK-8003
HY9-0007
CK-0544
RY9-0124
RY9-0123
RY9-0122
HY9-0022