Service Report Output Functions - Canon FAX L1000 Service Manual

3.1.2 Service report output functions

This fax outputs the service data setting status, past communications history reports, detailed
error information reports, etc. in service mode.
a) List of service reports
This fax outputs the service reports shown below.
Report type
Service data list
System dump list
Dch log report
Bch log report
Transmission report
(with service error code
and dump list)
Reception report
(with service error code
and dump list)
FAX-L1000 Chapter 2: Operating Instructions
Operations
In the service mode, press the Report button, select
the report type, and press the Set button.
(When the optional FAX-L1000 ISDN Kit is
installed, the Bch log report can be output if the
service data #4C ISDN Bitswitch SW01 bit 7 is
set to "0.")
If you set bits 0 and 1 of #1 SSSW SW01 in the service
mode, the service error code and dump list are indicated
on the activity report.
If you set bits 0 and 1 of #1 SSSW SW01 in the service
mode, the service error code and dump list are
indicated on the activity report.
2-13