Canon FAX L1000 Service Manual page 294

FAX-L1000 Chapter 4: Maintenance and Service
"NO RX PAPER" (#0012)
Cause:
Solution: Contact the other party and have them load paper into their fax.
"NO TEL#" (#0022)
Cause:
Solution: Register the one-touch speed dialing, coded speed dialing, or group dialing
"NOT AVAILABLE NOW"
Cause:
Solution: Check the contents of the one-touch speed dialing, coded speed dialing, or
"NOT FOUND, TRY AGAIN"
Cause:
Solution: Try again with a different number.
"OUTPUT TRAY FULL"
Cause:
Solution: Pick up the printed pages on the tray.
"PASSWORD POLL REJECT"
Cause:
Solution: Transmit without an ITU-T password.
"PASSWORD TX REJECT"
Cause:
Solution: Transmit without an ITU-T password.
"PRT ALT. PAPER SIZE? YES=( ) NO=(#)"
Cause:
Solution: If you do not mind printing on a different paper size, press
Declares that the other fax has no recording paper for DIS.
No one-touch speed dialing, coded speed dialing, or group dialing
telephone number is registered.
telephone number.
You pressed an one-touch speed dialing, coded speed dialing, or group
dialing, that is not registered for the feature you are trying to use.
group dialing registration, then try again.
The box number you specified does not exist.
The output tray is full of paper.
You set up a polling box for polling sending with an ITU-T password, but
the other party's fax unit does not support use of an ITU-T password for
polling receiving.
You attempted to send a document with an ITU-T password, but the other
party's fax unit does not support use of an ITU-T password for receiving.
The size of the available recording paper does not match the size of the
document waiting to be printed.
you want to print the correct paper size, press Stop button and install the
correct size paper. Then press Start/Scan button.
4-42
button. If