Canon FAX L1000 Service Manual page 109

#1 SSSW
SW26 (service soft switch 26: transmission function settings)
Bit Function
0 Compulsory direct transmission
function
1 Not used
2 Not used
3 Not used
4 Not used
5 (New) Transmission error redial function Yes
6 When STOP key is pressed
during a sequential boradcastiong communication communication
7 Error transmission report when
transmission is stopped
[Bit 5]
It can select whether transmission error redial function is effective.
When "Yes" is selected, transmission error redial setting function is displayed in
transmission setting item in user menu settings and it is possible to set and activate this
function. However, quick memory transmission function and memory overflow
transmission function are invalid. The quick memory transmission function itself is not
displayed as setting item.
When "No" is selected, transmission error redial setting function is not displayed in the
transmission setting item in user menu settings and it is impossible to set and activate this
function. Though, quick memory transmission function and memory overflow
transmission function are valid.
Bit5
Function
Transmission error
redial
Quick memory
transmission
Memory overflow
transmission
FAX-L1000 Chapter 2: Operating Instructions
1
Set
Only cancel
in progress
Not output
1
Setting: possible
Operation: possible
Setting: impossible
Operation: impossible
Operation: impossible Operation: possible
2-53
0
Not set
No
Cancel all
output
0
Setting: impossible
Operation: impossible
Setting: possible
Operation: possible