Smeg SF4603VCNX Manual page 72

7. Press the control knob to start filling the
reservoir with the solution.
The appliance will automatically
draw sufficient solution to fill the
reservoir.
If water remains in the reservoir for
longer than 24 hours, a message
appears on the display requesting
you to drain the reservoir.
8. When the appliance has finished taking
in water, shake the tube to remove any
residual water.
158
Cleaning and maintenance
9. Return the tube to its original position,
remove the container of solution and
close the door.
When the door is closed, an
automatic system will automatically
draw in any residual solution in the
tube to avoid drips.
10. Press the control knob to start the
reservoir cleaning procedure. The
display will show the time left until the
end of the cleaning cycle.
When the cleaning process is complete, a
buzzer will sound and the display will show
the solution draining screen.