Table of Contents
Advertisement
33. We recommend positioning the
supplied sponge inside the evaporation
tray.
34. Press the control knob to start emptying
the remaining water from the reservoir.
The residual water is discharged into the
evaporation tray: as well as facilitating
removal, this contributes to cooling down
the oven more quickly.
If the remaining quantity of water is over
500 ml, the water will be discharged into
the evaporation tray in two different steps to
facilitate drying. The display indicates "STEP 1",
when the first stage has finished, and
draining will stop. You have to press the
control knob again to complete the draining
with "STEP 2".
104
Use
When finished, "reservoir emptying ended"
appears on the display.
35. Press the control knob to confirm.
If you do not wish to empty the
reservoir, keep the control knob
pressed down for a few seconds.
36. Squeeze out the water from the sponge
into a separate container.
Take care: the water may be very
hot.
37. Also remove condensation from the
base and walls of the oven, the door
glass and drip tray and the front of the
appliance.
Advertisement
Table of Contents
