Table of Contents
Advertisement
3. Remove the cover from the evaporation
tray and dry it with the sponge supplied.
Note: The evaporation tray cover
may be very hot: use appropriate
protection.
4. We recommend positioning the supplied
sponge inside the evaporation tray.
5. Press the control knob to start emptying
the remaining water from the reservoir.
120
Use
The residual water is discharged into the
evaporation tray: as well as facilitating
removal, this contributes to cooling down
the oven more quickly.
If the remaining quantity of water is over
500 ml, the water will be discharged into
the evaporation tray in two different steps to
facilitate drying. The display indicates "STEP 1",
when this finishes, draining will stop. You
have to press the control knob again to
complete the draining with "STEP 2".
When finished, "reservoir emptying ended"
appears on the display.
6. Press the control knob to confirm.
If you do not wish to empty the
reservoir, keep the control knob
pressed down for a few seconds.
7. Squeeze out the excess water into a
separate container.
Take care: the water may be very
hot.
Advertisement
Table of Contents
