Table of Contents
Advertisement
21. Return the tube to its original position,
remove the container of water and close
the door.
When the door is closed, an
automatic system will automatically
draw in any residual water in the
tube to avoid drips.
22. Press the control knob to start the steam
function.
If programmed cooking has been
set (in our example ending at
13:30), cooking will start at a time
according to the set parameters.
Cooking can be interrupted at any
time by pressing and holding the
control knob for a few seconds.
Each time the door is opened, the
function in progress will stop and
then automatically restart when the
door is closed again.
Use
Preheating stage
Steaming is always preceded by a
preheating stage, which allows the
appliance to heat up to cooking
temperature.
This stage is indicated by a progressive
increase in the temperature level reached.
At the end of preheating the temperature
reaches the maximum set level.
If cooking has just been performed
with temperatures greater than
100°C, you must wait for the oven
to cool in order to use the steam
function.
101
Advertisement
Table of Contents
