Smeg SF4603VCNX Manual page 16

A buzzer sounds to indicate that cooking
starts automatically.
Modifying the set data
During operation, it is possible to modify the
cooking duration:
23. When the appliance is cooking, press
the control knob.
24. Turn the control knob right or left to alter
the preset cooking time.
If a longer length of time is set
compared to the previous one,
such that the quantity of water in
the reservoir is insufficient, when
the reservoir is empty, the display
will show a message indicating
that water should be added.
102
Use
Modifying programmed cooking
If programmed cooking is set, after
modifying the cooking time, the
end of cooking time must be re-set.
25. When the appliance is waiting to start
cooking, press the control knob. The
timed cooking indicator light
start flashing.
26. Turn the control knob right or left to alter
the preset cooking time.
27. Press the control knob again. The timed
cooking indicator light
and the programmed cooking indicator
light starts flashing. The display
shows the cooking end time.
28. Turn the control knob to the right or left
to delay the end of cooking time.
29. After a few seconds the timed
cooking
cooking
flashing and programmed cooking
restarts with the new settings.
switches off
and programmed
indicator lights stop
will