Fitting The Stability Bracket Or Chain - Rangemaster Professional+ FX 90 Induction User's Manual & Installation Instructions

Fig. 7.7
Stability chain
Fig. 7.8 Stability bracket
3 mm min
ArtNo.070-0014 - Stability bracket - Wall fitting
Fig. 7.9
Outer stability
bracket
3 mm min
Wall
Typical wall mounting
Check the appliance is electrically safe when you have finished.
Cooker
Floor
Typical oor mounting
Cooker
Floor
INSTALLATION
Fitting the stability bracket or
chain
Unless otherwise stated, a cooker using a flexible gas
connector must be secured with a suitable stability device.
Suitable stability devices are shown in Fig. 7.7, Fig. 7.8 and
Fig. 7.9.
If you are using a stability chain (Fig. 7.7) then the chain
should be kept as short as is practicable and fixed firmly to
the rear of the cooker.
If you are using a stability bracket (Fig. 7.8 and Fig. 7.9), then
adjust the bracket to give the smallest practicable clearance
between the bracket and the engagement slot in the rear of
the cooker.
Fit the bracket so that it engages as far as possible over the
chassis of the cooker.
27