Peculiar Smells; Ventilation; Maintenance - Rangemaster Professional+ FX 90 Induction User's Manual & Installation Instructions

cooker control unit incorporating a double
pole switch, having a contact separation of at
least 3 mm in all poles.
Read the instructions before installing or using
this appliance.
This appliance is heavy so take care when
•
moving it.
The total electrical load of the appliance is
•
approximately 3.6 kW. The cable size used
should be suitable for this load and comply
with all local requirements.
The cooker may be installed in a kitchen/
•
kitchen diner but NOT in a room
containing a bath or shower.
This cooker must be earthed.
•
This cooker MUST NOT be connected to
•
an ordinary domestic power point.
It is normal for the hob control display
•
to flash for about 2 seconds during first
power setting.
Set the clock to make sure that the oven is
•
functional – see the relevant section in this
manual.
The appliance must be installed in
•
accordance with the regulations in force
and only in a well ventilated space.
Failure to install the appliance correctly
•
could invalidate any warranty or liability
claims and lead to prosecution.
DO NOT install the appliance on a
•
platform.
DO NOT manouvre the cooker while it is
•
plugged into the electricity supply.
Before electrical reconnection, check that
•
the appliance is electrically safe.

Peculiar smells

When you first use your cooker it may give off
an odour. This should stop after use.
Before using for the first time, make sure that
all packing materials have been removed and
then, to dispel manufacturing odours, turn the
ovens to 200 °C and run for at least an hour.
Before using the grill for the first time you
should also turn on the grill and run for 30
minutes with the grill pan in position, pushed
fully back and the grill door open.
Make sure the room is well ventilated to the
outside air (see 'Ventilation' below). People with
respiratory or allergy problems should vacate
the area for this brief period.

Ventilation

The use of a cooking appliance results in the
production of heat and moisture in the room
in which it is installed. Therefore, make sure
that the kitchen is well ventilated: keep natural
ventilation holes open or install a powered
cookerhood that vents outside. If you have
several hotplates/burners on, or use the cooker
for a long time, open a window or turn on an
extractor fan

Maintenance

Only a qualified service engineer
•
should service the appliance and only
approved spare parts should be used. It
is recommended that this appliance is
serviced annually.
Before replacing the bulb, turn off the
•
power supply and make sure that the oven
is cool.
DO NOT use cooking vessels on the
•
hotplate that overlap the edges.
Unless specified otherwise in this guide,
•
always allow the cooker to cool and then
switch it off at the mains before cleaning or
carrying out any maintenance work.
2