Control Signal Timings For Counter Timing For Counter Control Signal - Contec DA16-16L User Manual

Control Signal Timings for Counter
Timing for Counter Control Signal
Figures 6.6, 6.7, and Table 6.4 shows the timing for counter I/O signal.
Counter Up Pulse Input
Figure 6.6. Timing for Counter Input Signal
Counter Compair Output
Figure 6.7. Timing for Counter Output Signal (Pulse output)
Table 6.4. Timing List for Control Signal
Set up time of counter input signal (Rising edge)
Hold time of counter input signal (Rising edge)
Pulse width of counter output signal
CAUTION
The times listed in Table 6.4 are for standard operating conditions.
DA16-16(LPCI)L, DA16-8(LPCI)L
t t
SRC HRC
t
PSC
Parameter
6. About Hardware
Symbol Time Unit
t 100 nsec
SRC
t 100 nsec
HRC
t 1000 nsec
PSC
69