Step4 Initializing The Software - Contec DA16-16L User Manual

Step4 Initializing the Software

The driver library requires the initial setting to recognize the execution environment. It is called the
initialization of the Driver library.
Setting the device name
(1) Run Device Manager. From [My Computer] - [Control Panel], select [System] and then select the
[Device Manager] tab.
(You can also open Device Manager by right clicking on My Computer and selecting Properties.)
(2) The installed hardware appears under the CONTEC Devices node. Open the CONTEC Devices
node and select the device you want to setup (the device name should appear highlighted). Click
[Properties].
DA16-16(LPCI)L, DA16-8(LPCI)L
* The name of the board
you have just added is
displayed.
- DA16-16(LPCI)L
- DA16-8(LPCI)L
2. Setup
19