External Connection; How To Connect The Connectors; Connector Shape - Contec DA16-16L User Manual

3. External Connection

This chapter describes the interface connectors on the product and the external I/O circuits.
Check the information available here when connecting an external device.

How to connect the connectors

Connector shape

To connect an external device to this product, plug the cable from the device into the interface
connector (CN1) shown below.
Interface connector (CN1)
* Please refer to chapter 1 for more information on the supported cable and accessories.
Figure 3.1. Interface Connector Shape
DA16-16(LPCI)L, DA16-8(LPCI)L
- Connector used
50-pin mini-ribbon connector
10250-52A2JL[mfd.by 3M]
or equivalence to it.
- Applilcable connector
10150-6000EL[mfd. by 3M]
or equivalence to it.
CN1
3. External Connection
27