Step 1 Installing The Software; Which Driver To Use - Contec DA16-16L User Manual

2. Setup

Step 1 Installing the Software

This section describes how to install the Driver libraries.
Before installing the hardware on the PC, install the bundled disk provided with the board.
The following description assumes the operating system as Windows XP. Although some user
interfaces are different depending on the OS used, the basic procedure is the same.

Which Driver to Use

CONTEC has two analog I/O drivers: "API-AIO(WDM)" and "API-AIO(98/PC)".
API-AIO(WDM) is a new driver for analog I/O under Windows.
This driver was developed to be easier to use and to provide additional functions above those provided
by the previous API-AIO(98/PC) driver.
Please use the API-AIO(WDM) with this board. API-AIO(98/PC) is not supported.
11
DA16-16(LPCI)L, DA16-8(LPCI)L