Table of Contents
Advertisement
1. Before Using the Product
Handling Precautions
DANGER
Do not use the product where it is exposed to flammable or corrosive gas. Doing so may result in
an explosion, fire, electric shock, or failure.
CAUTION
-
There are switches and jumpers on this product that need to be set in advance.
Be sure to check these before installing the board.
-
Only set the switches and jumpers on this product to the specified settings.
Otherwise, this product may malfunction, overheat, or cause a failure.
-
Do not strike or bend this product.
Otherwise, this product may malfunction, overheat, cause a failure or breakage.
-
Do not touch this product's metal plated terminals (edge connector) with your hands.
Otherwise, this product may malfunction, overheat, or cause a failure.
If the terminals are touched by someone's hands, clean the terminals with industrial alcohol.
-
Do not install this product to the expansion slot and do not plug or unplug the cables which are
connected to this product while the PC or expansion unit is still turned on.
Otherwise, this product may malfunction, overheat, or cause a failure.
Be sure that the personal computer power is turned off.
-
Make sure that your PC or expansion unit can supply ample power to all the product installed.
Insufficiently energized products could malfunction, overheat, or cause a failure.
-
The specifications of this product are subject to change without notice for enhancement and
quality improvement.
Even when using the product continuously, be sure to read the manual and understand the
contents.
-
Do not modify the product. CONTEC will bear no responsibility for any problems, etc., resulting
from modifying this product.
-
Regardless of the foregoing statements, CONTEC is not liable for any damages whatsoever
(including damages for loss of business profits) arising out of the use or inability to use this
CONTEC product or the information contained herein.
-
Regarding "CE EMC Directive Notice".
Please connect the Interface Connector with a shielded cable to meet the mentioned standard
above.
6
DA16-16(LPCI)L, DA16-8(LPCI)L
Advertisement
Table of Contents
