Hardware Specification - Contec DA16-16L User Manual

6. About Hardware

Hardware specification

DA16-16(LPCI)L
Table 6.1. Specification < DA16-16(LPCI)L >
Item
Analog output
Isolated specification
Number of output channels
Output range
Absolute max. output
currency
Output impedance
Resolution
Non-Linearity error *1
Conversion speed
Buffer memory
Conversion start trigger
Conversion stop trigger
External start signal
External stop signal
External clock signal
Digital I/O
Number of input channels
Number of output channels
Counter
Number of channels
Counting system
Max. count
Number of external inputs
Number of external outputs
Response frequency
Common section
I/O address
Interruption level
Connector used
Power consumption (Max.)
Operating condition
Bus specification
Dimension (mm)
Weight
*1: A linearity error approximately 0.1% of full-range may occur when operated at 0 ° C or 50 ° C ambient
temperature.
*2: This product requires power supply at +5V from an expansion slot (it does not work on a machine with a
+3.3V power supply alone).
62
Non-isolation
16 channels
Bipolar ±10V
±3mA
1 Ω or less
16bit
±5LSB
10 µ sec [100KSPS] (Max.)
1K data
Software / external trigger
Number of sampling times / external trigger/software
TTL level (Rising or falling edge can be selected by software)
Digital filter (1µ sec can be selected by software)
TTL level (Rising or falling edge can be selected by software)
Digital filter (1µ sec can be selected by software)
TTL level (Rising or falling edge can be selected by software)
Non-isolated input 4 channels (TTL level positive logic)
Non-isolated output 4 channels (TTL level positive logic)
1 channel
Up count
FFFFFFFFh (Binary data,32bit)
2 TTL level (Gate/Up)/ch Gate (High level), Up (Rising edge)
TTL level Count match output (positive logic, pulse output)
10MHz (Max.)
64 ports
Errors and various factors, One interrupt request line as INTA
50-pin mini-ribbon connector
10250-52A2JL [mfd. by 3M] or equivalence to it
5VDC 1100mA
0 - 50°C, 10 - 90%RH (No condensation)
32bit, 33MHz, Universal key shapes supported *2
121.69 (L) x 63.41 (H)
60g
Specification
DA16-16(LPCI)L, DA16-8(LPCI)L