Cannon C60DP Use And Installation Instructions page 29

Cooker Exterior
Door and Control
Panel (Glass)
Door and Control
Panel Trims
(Stainless Steel)
Solar Plus Grill
Replacement of
the Oven Light
CARE AND CLEANING
The outside of the cooker should be cleaned regularly to keep it
looking like new.
Wipe over with a soft cloth wrung out in warm water and dry with
a soft clean cloth.
You can use mild non abrasive cleaners but always read the
manufacturer's instructions first. Always test their suitability on a
small area of the cooker not noticeable in normal use.
NOTE: DO NOT use scouring pads or abrasive cleaners as they
may scratch the surface.
Wear protective gloves when cleaning any part of your cooker.
Regularly wipe with a clean, damp cloth and polish with a clean,
dry cloth.
Regularly wipe with a clean, damp cloth and polish with a clean,
dry cloth.
To clean the solar plus grill, use a clean, damp, soapy cloth and
wipe over. If stubborn stains remain, gently clean with a well
soaped nylon scouring pad and wipe over with a damp cloth.
NOTE: DO NOT use metal cleaning utensils, wire wool or
proprietary oven cleaners on the grill element mesh.
WARNING: TO AVOID ELECTRIC SHOCK, BEFORE REPLACING THE
OVEN LIGHT, SWITCH THE COOKER OFF AT THE COOKER CONTROL
UNIT (and allow to cool if the oven has been used).
Unscrew the glass cover, using a suitable cloth to protect the
fingers and remove carefully. Unscrew the existing light bulb, and
remove. Screw the new bulb into position and replace the glass
cover, with metal washer, until positioned securely.
29