JVC DT-V1710CG Instructions Manual page 20

How to Use SET-UP MENU
STATUS DISPLAY
7 1080/1035
When the component signal is input, the monitor
does not automatically discriminate the 1080/60i
signal from the 1035/60i signal. Set this item
according to the input signal format.
• 1080/1035
7 LEVEL METER ch
Selects the audio channels used in the AUDIO
LEVEL METER display.
• OFF/1:2/12:34/31:24/123:456/1-8
NOTES:
• Numbers indicate the audio channel. The channel input
level indicated on the left side of ":" is displayed on the
left side of the screen, and the channel input level
indicated on the right side of ":" is displayed on the right
side of the screen.
• The AUDIO LEVEL METER display does not appear
when this item is set to "OFF."
• When "1-8" is selected, the channel input level for 1, 2,
3 and 4 is displayed on the left side of the screen, and
the channel input level for 5, 6, 7 and 8 is displayed on
the right side of the screen.
7 BAR TYPE
Selects the color of the AUDIO LEVEL METER
display.
W. 100: White color display
W. 50: White (half transparent) display
3COLORS: The AUDIO LEVEL METER display uses
three different colors (red, yellow and
green) to indicate variations in input levels.
Red: Displayed when the audio input is at the
same level set in "OVER LEVEL" or higher.
Yellow: Displayed when the audio input is at the
same level set in "REFERENCE LEVEL" or
higher.
Green: Displayed when the audio input is lower
than the level set in "REFERENCE LEVEL."
NOTES:
• For "W. 100" and "W. 50," the line indication for the
standard input level set in the "REFERENCE LEVEL" is
displayed. Input level set in the "OVER LEVEL" is not
displayed.
• As for the audio channel bar display with no signal
input, white is displayed for the "3COLORS" setting, and
gray is displayed for other settings.
20
(cont.)
7 BAR BRIGHTNESS
Selects the brightness of the AUDIO LEVEL
METER display.
HIGH: Brighter
LOW: Darker
7 REFERENCE LEVEL
Sets the standard input level.
• –20dB/–18dB
7 OVER LEVEL
Sets the input level's lower limit indicated in red for
the "3COLORS" display.
• –10dB/–8dB/–6dB/–4dB/–2dB
NOTE:
• "–10dB" is displayed only for the compatible input cards.
AUDIO LEVEL METER display example
LEVEL METER ch: 1-8, BAR TYPE: 3COLORS
Audio channels and OVER/
REFERENCE LEVEL indication
CONTROL LOCK
Prohibits altering the monitor operations except turning
the monitor on/off and deactivating this function.
• ON/OFF
NOTES:
• When "CONTROL LOCK" is set to "ON," "
on!" appears on the screen if you try to operate the monitor.
• Operating the monitor from the external control is available
if this function is activated.
all reset
Resets all the settings you have made to factory-preset
values.
• Adjustments made by using the front panel buttons
will also be reset. (Picture adjustments made by the
knobs—PHASE, CHROMA, BRIGHT, and
CONTRAST—will not be reset.)
1. Select "all reset" by using
button.
Confirmation message is displayed.
2. To initialize, press button.
• To cancel the initialization, press the MENU button.
(cont.)
Control lock
/ buttons, then press