Mercedes-Benz CLA Owner's Manual page 502

Notes on storing wheels
When storing wheels, observe the following
notes:
After removing wheels, store them in a cool,
R
dry and preferably dark place.
Protect the tyres from contact with oil,
R
grease or fuel.
Overview of the tyre-change tool kit
Apart from some country-specific variants, vehi‐
cles are not equipped with a tyre-change tool kit.
For more information on which tyre-changing
tool kits are required and approved for perform‐
ing a wheel change on your vehicle, consult a
qualified specialist workshop.
You require the following tools, for instance, to
change a wheel:
Jack
R
Chock
R
Wheel wrench
R
% The jack weighs approximately 3.4 kg.
The maximum load capacity of the jack can
be found on the sticker affixed to the jack.
The jack is maintenance-free. If there is a
malfunction, please contact a qualified spe‐
cialist workshop.
The tyre-change tool kit is located in tool bag
in the boot.
1
Tool bag
Tool bag 1 contains:
Jack
R
Gloves
R
Wheel wrench
R
Folding chock
R
Ratchet for jack
R
Setting up the folding chock
1
Wheels and tyres 499