Mercedes-Benz CLA Owner's Manual page 216

is responsible for complying with road traffic
regulations and driving at a suitable speed.
In difficult conditions (e.g. unclear roads, lane
narrowing, wet road surfaces, snow or ice) or
when driving with a trailer, the speed adjustment
made by the system may not always be suitable.
In these situations the driver must intervene
accordingly.
& WARNING Risk of accident in spite of
route-based speed adjustment
Route-based speed adjustment might mal‐
function or be temporarily unavailable in the
following situations:
If map data is not up to date or available
R
If you do not follow the selected route
R
guidance
If the set route is re-planned
R
In road construction areas
R
When towing a trailer
R
In bad weather or road conditions
R
If the accelerator pedal is depressed
R
Adjust the speed to the traffic situation.
#
Setting route-based speed adjustment
Requirements:
Active Distance Assist DISTRONIC is activa‐
R
ted.
Multimedia system:
© Settings Assistance
4 5 5
Route-based speed adapt.
5
Activate or deactivate the function.
#
When the function is active, the vehicle
speed is adjusted depending on the route
events ahead.
% Further information on the route-based
speed adaptation ( page 212).
/
Active Steering Assist
Function of Active Steering Assist
% The following function is country-dependent
and only available in conjunction with the
Driving Assistance Package.
Driving and parking 213
Active Steering Assist is only available up to a
speed of 210 km/h. The system helps you to
stay in the centre of the lane by means of mod‐
erate steering interventions. Depending on the
speed driven, Active Steering Assist uses the
vehicles ahead and lane markings as a refer‐
ence.
% Depending on the country, in the lower
speed range Active Steering Assist can use
the surrounding traffic as a reference. If nec‐
essary, Active Steering Assist can then also
provide assistance with a driving style out‐
side the centre of the lane.
When the system is actively steering, the à
symbol is shown in green in the multifunction
display.
If the detection of lane markings and vehicles
ahead is impaired, Active Steering Assist
switches to passive mode. The system provides
no support in this case. During the transition
from active to passive status, the à symbol is
shown as enlarged and flashing. Once the sys‐
tem is passive, the à symbol is shown as
grey in the multifunction display.