Mercedes-Benz CLA Owner's Manual page 213

Hide thumbs Also See for CLA:
Table of Contents

Advertisement

210 Driving and parking
your foot from the accelerator pedal (Active
Distance Assist DISTRONIC).
The current driven speed is stored and main‐
tained (Active Distance Assist DISTRONIC) or
limited (variable limiter) by the vehicle.
or
To activate with a stored speed: press
#
rocker switch
4
up (RES). Remove your foot
from the accelerator pedal (Active Distance
Assist DISTRONIC).
%
If rocker switch
4
is pressed up (RES) again
after activation with a stored speed, Active
Distance Assist DISTRONIC or the variable
limiter is activated with the speed restriction
displayed in the instrument cluster.
Accepting the displayed speed restriction
when Distance Assist DISTRONIC or the lim‐
iter is activated
Press rocker switch
4
up (RES).
#
The speed limit displayed in the instrument
cluster is adopted as the stored speed. The
vehicle adapts its speed to that of the vehicle
in front, but only up to the stored speed.
Pulling away with Active Distance Assist
DISTRONIC
Remove your foot from the brake pedal and
#
activate Active Distance Assist DISTRONIC.
Press rocker switch
4
up (RES).
#
or
Depress the accelerator pedal briefly and
#
firmly.
The functions of Active Distance Assist
DISTRONIC continue to be carried out.
Deactivating Active Distance Assist
DISTRONIC
& WARNING Risk of accident due to Active
Distance Assist DISTRONIC still being
activated when you leave the driver's
seat
If you leave the driver's seat while the vehicle
is being braked by Active Distance Assist
DISTRONIC only, the vehicle can roll away.
Always deactivate Active Distance
#
Assist DISTRONIC and secure the vehi‐
cle to prevent it from rolling away
before you leave the driver's seat.
Press rocker switch
4
down (CNCL).
#
%
If you brake, deactivate ESP
intervenes, Active Distance Assist
DISTRONIC is deactivated.
Increasing or reducing the speed
Press rocker switch
3
up (SET+) or down
#
(SET-) to the pressure point.
The stored speed is increased or reduced by
1 km/h.
or
Press and hold rocker switch
#
down (SET-) to the pressure point.
The stored speed is increased or reduced in
increments of 1 km/h.
or
Press rocker switch
3
up (SET+) or down
#
(SET-) beyond the pressure point.
The stored speed is increased or reduced by
10 km/h.
or
®
®
or if ESP
3
up (SET+) or

Hide quick links:

Advertisement

Table of Contents
loading

Table of Contents