Mercedes-Benz CLA Owner's Manual page 107

104 Seats and stowing
Release the rear seat backrest and fold it for‐
#
wards slightly ( page 112).
/
Pull the head restraint upwards as far as it
#
will go.
Push release knob 1 in the direction of the
#
arrow and pull out the head restraint.
Fitting
Insert the head restraint such that the
#
notches on the bar are on the left when
viewed in the direction of travel.
Push the head restraint down until it
#
engages.
Fold the rear seat backrest back until it
#
engages.
Configuring the seat settings
Multimedia system:
© Comfort Seat comfort
4 5 5
Adjusting the seat contour in the lumbar
region of the seat backrest (lumbar)
Select Lumbar.
#
Select the settings Z for the desired seat.
#
Adjust the air cushions.
#
Adjusting the backrest side bolsters
Select Side bolsters.
#
Adjust the air cushion for the desired seat.
#
Mercedes-AMG vehicles: observe the notes in
the Supplement. Otherwise, you may fail to rec‐
ognise dangers.
Selecting the massage program for the front
seats
Multimedia system:
© Comfort Massage
4 5 5
Select a seat.
#
Select Wave Massage or Pulsating
#
The selected program will start.
To set the massage intensity: switch
#
intensity on or off .
Resetting seat settings
Multimedia system:
© Comfort
4 5
Select Reset.
#
Select ß for the desired seat.
#
The settings for the selected seat are reset.
Switching the seat heater on/off
& WARNING Risk of burns due to repeat‐
edly switching on the seat heater
Repeatedly switching on the seat heater can
cause the seat cushion and seat backrest
padding to become very hot.
The health of persons with limited tempera‐
ture sensitivity or a limited ability to react to
Massage.
high temperatures may be affected or they
may even suffer burn-like injuries.
High
Do not repeatedly switch on the seat
#
heater.
Seat comfort
5