Mercedes-Benz CLA Owner's Manual page 214

Press and hold rocker switch
#
down (SET-) beyond the pressure point.
The stored speed is increased or reduced in
increments of 10 km/h.
Reducing or increasing the specified dis‐
tance from the vehicle in front
To increase the specified distance: press
#
rocker switch 2 down.
To reduce the specified distance: press
#
rocker switch 2 up.
Function of Active Speed Limit Assist
% The following function is country-dependent
and only available in conjunction with the
Driving Assistance Package.
3 up (SET+) or
If a change in the speed limit is detected and
Active Distance Assist DISTRONIC is activated,
Active Distance Assist DISTRONIC adapts this
new speed as the stored speed.
The driven speed is adjusted when the vehicle is
level with the traffic sign at the latest. In the
case of signs indicating entry into an urban area,
the speed is adapted according to the speed
permitted within the urban area. The speed limit
Driving and parking 211
display in the Instrument Display is always upda‐
ted when the vehicle is level with the traffic sign.
If there is no speed restriction on an unlimited
stretch of road (e.g. on a motorway), the recom‐
mended speed is automatically adopted as the
stored speed. The system uses the speed stored
on an unlimited stretch of road as the recom‐
mended speed. If you do not alter the stored
speed on an unlimited stretch of road, the rec‐
ommended speed is 130 km/h.
If Active Distance Assist DISTRONIC has been
put into passive mode by pressing the accelera‐
tor pedal, only speed limits which are higher
than the set speed are adopted.
Active Speed Limit Assist is only an aid. The
driver is responsible for keeping a safe distance
to the vehicle in front, for vehicle speed and for
braking in good time. The maximum permissible
speed also depends on factors such as the road
surface and traffic conditions.
System limits
Temporary speed restrictions (e.g. for a certain
time or due to weather conditions) cannot be
properly detected by the system. The maximum