Port Physical Performance Statistics; Dbm Physical Performance Statistics - Paradyne 9120 User Manual

Port Physical Performance Statistics

DBM Physical Performance Statistics

9121-A2-GB20-00
These statistics only appear when Port-1 or Port-2 Physical is selected from the
Performance Statistics menu. They are only available when the port is enabled.
Main Menu Status
Statistic What It Indicates
Rx Overruns Number of receiver overruns (too many bits) on the interface.
Rx DTR Lost Events Number of times DTR has been lost/lowered on the interface.
Rx Non-octet Frames Number of non-octet frames received on the interface.
Rx CRC Errors Number of cycle redundancy check errors received on the
interface.
Tx CTS Lost Events Number of times CTS has been lost/lowered on the interface.
Tx Underruns Number of transmitter underruns (too few bits) on the
interface.
These statistics only appear when an ISDN BRI DBM is installed, enabled, and
DBM Physical is selected from the Performance Statistics menu.
Main Menu Status
Statistic What It Indicates
Call Attempts Number of unsuccessful call attempts made by the DBM.
Calls Originated Number of successful call attempts made by the DBM.
Calls Answered Number of successful calls answered by the DBM.
Calls Rejected Number of calls rejected by the DBM due to security.
(Security)
Calls Rejected (Other) Number of calls rejected by the DBM due to reasons other
than security.
Average Call Duration Average amount of time, in minutes, that successful calls take.
(mins) Calculation is on actual call time; it does not include security
verification, call back time, etc.
Longest Call Duration Amount of time spent, in minutes, during the longest
(mins) successful call. Time tracked does not include security
verification, retries, etc.
Total Call Duration Sum of all successful calls in minutes. Total accumulated does
(mins) not include security verifications, retries, etc.
June 1997
Displaying System Information
Performance Statistics
Performance Statistics
Port-n Physical
DBM Physical
4-21