Using The Interface; Selecting From A Menu; Selecting A Field - Paradyne 9120 User Manual

Using the Interface

Selecting from a Menu

Selecting a Field

9121-A2-GB20-00
This section leads you through the basic operations of using the interface.
You select from a menu to get subsequent menus or screens so you can perform
desired tasks.
Procedure
To make a menu selection:
1. Tab or press the arrow keys to position the cursor on a menu selection. Each
menu selection is highlighted as you press the key to move the cursor from
position to position.
2. Press Return. The selected menu or screen appears.
3. Continue Steps 1 and 2 until you reach the screen you want.
Refer to the Quick Reference to guide you through menu selections.
Once you reach the desired menu or screen, select a field to view, change, or
issue a command. Press the Tab or right arrow key to select a field within a
menu. The current setting or value appears to the right of the field.
Example:
To change the amount of time that a test will run before it is stopped from
10 minutes to 15 minutes:
Main Menu Configuration
Configuration
enter 15 press Return
Example:
Selecting Control from the Main Menu, selecting Administer Logins, then entering
or changing security information.
Main Menu Control
June 1997
Load Configuration From:
General Tab to Test Duration (min): 10
Administer Logins
User Interface
Current
[New/Delete]
2-7