Paradyne 9120 User Manual page 66

Maintenance and Troubleshooting
5-16
Message Cause
No.
Quality of service 49
unavailable
Recovery of timer 102
expired
Requested channel 44
not available
Requested facility 69
not implemented
Requested facility 50
not subscribed
Resource 47
unavailable,
unspecified
Response to 30
STATus ENQuiry
Service/option not 79
implemented
Service/option 63
unavailable,
unspecified
Switching 42
equipment
congestion
June 1997
What It Indicates
Requested Quality of
Service requested cannot
be provided (e.g.,
throughput cannot be
supported).
Error-handling procedure
has been initiated as a
result of the expiration of a
timer.
Circuit or channel
requested cannot be
provided by the other side
of the interface.
Supplemental service
requested is not supported
by this device.
The supplementary service
requested cannot be
provided by the network
until user completes
arrangement with its
supporting networks.
No other cause in the
resource unavailable class
applies for this resource
unavailable event.
Status enquiry message
received, generating this
message.
No other cause in the
service or option not
available class applies for
this not implemented event.
No other cause in the
service or option not
available class applies for
this not available event.
Switching equipment
sending the cause is
experiencing heavy traffic.
What To Do
No action needed.
Retry the call.
Allow the DBM to
automatically call using the
alternate link if Auto
Backup is enabled, or
manually select an
alternate path for the call.
No action needed.
1. Notify your system
administrator that the
arrangements are not
complete.
2. Complete the necessary
arrangements.
No action needed.
No action needed.
No action needed.
Wait and try again.
Wait and try again.
9121-A2-GB20-00